La Crosse Technology WS-1611TWC-IT Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Stations météorologiques La Crosse Technology WS-1611TWC-IT. La Crosse Technology WS-1611TWC-IT weather station Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 31
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
PROFESSIONAL WEATHER CENTER
WS-1611
Operation Manual
1
Table of Contents
Topic
Page
Features
3
Setting up
6
Function keys
12
LCD Screen
15
Manual Setting
17
Time alarm setting
25
Weather alarm operations
26
Hysteresis
32
Weather forecast and weather tendency
33
Wind direction and wind speed measurement
37
Rainfall measurement
38
Viewing history data
38
Viewing the min/ max weather data
40
Switch On/ Off buzzer
47
Outdoor transmission 915 MHz reception
49
Positioning
50
Care and Maintenance
54
Specification
55
Warranty Information
57
Vue de la page 0
1 2 3 4 5 6 ... 30 31

Résumé du contenu

Page 1 - WS-1611

PROFESSIONAL WEATHER CENTER WS-1611 Operation Manual 1 Table of Contents Topic Page Features 3 Setting up 6 Function keys 12

Page 2

18 MANUAL TIME SETTING: You then may manually set the time of the clock by following the steps below: 1. The hour digit will start flashing

Page 3

20 °F/°C TEMPERATURE UNIT SETTING The temperature display can be selected to show temperature data in °F or °C. (default °F) 1. The temperatu

Page 4 - Batteries

22 RELATIVE PRESSURE REFERENCE VALUE SETTING Note: The default reference pressure value of the barometer is 29.91inHg when batteries are first inse

Page 5

24 STORM WARNING THRESHOLD VALUE SETTING You may also define a switching sensitivity value for the storm warning display at a decrease of air pressu

Page 6 - Sensor signal reception

26 4. Press the + or MIN/MAX key to set the minute of the alarm time. Press the ALARM key to confirm. Wait for about 30 seconds and the display will

Page 7 - FUNCTION KEYS:

28 Default alarm values: Temperature Low 32qF High 104qF Relative Humidity Low 45% High 70% Wind speed High 62.0mph HIGH AND LOW OUTDOOR TEMPERATU

Page 8 - LCD SCREEN

30 HIGH AND LOW OUTDOOR HUMIDITY ALARM SETTING Note: The High and Low outdoor humidity alarm can be set On/Off independently according to your need

Page 9 - Digit flashing

32 4. Press the ALARM key once to return to the normal display mode. In case the wind speed exceeds the condition for high wind speed alarm, the va

Page 10

34 However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or wor

Page 11 - Flashing

36 The horizontal axis represents the last 12 hours air pressure recording (-12, -9, -6, -3 and 0 hour). The bars are plotted at each of t

Page 12

2 PROFESSIONAL WEATHER CENTER Instruction Manual Congratulations on purchasing this state-of-the-art Professional Weather Center as an example of

Page 13 - TIME ALARM SETTING

38 RAINFALL MEASUREMENT The total rainfall measurement is displayed in the fourth section of the LCD, in the unit of mm or inch. (see VIEWING THE MI

Page 14 - WEATHER ALARM OPERATIONS

40 2. Press MIN/ MAX to view older records. (Press MIN/MAX and + key to view "Previous" and "Next" record respectively. The reco

Page 15 - Alarm-On

42 4. Max outdoor humidity with the date and time of recording MAX iconMAX outdoor humidity value Time and date or record

Page 16

44 8. Max relative pressure with the date and time of recording MAX iconMAX relative pressure valueTime and date or recor

Page 17 - HYSTERESIS

46 2. Press and hold the SET key for about 2 seconds, then the "RESET" icon will appear at the bottom part of the LCD. 3. Press the + key

Page 18

48 To re-enable the buzzer: 1. When the BUZZER OFF icon is shown on LCD, press the SET key shortly and the BUZZER OFF icon will disappear.

Page 19 - Text showing wind speed in

50 reset all units (see Setting up above) otherwise transmission problems may occur. x During normal operation, after the outdoor display shows &qu

Page 20 - VIEWING THE HISTORY DATA

52 Thermo-hygro Sensor An ideal mounting place for the thermo-hygro sensor would be the outer wall beneath the extension of a roof, as

Page 21

54 Rain Sensor For best results, the rain sensor should be securely mounted onto a horizontal surface about 1 meter above the ground and in

Page 22

56 Wind speed : 0 to 111.8 mph (0 to 50 m/s) (displayed "OF.L" when > 50m/s) Wind chill : -40°F to +139.8°F (-40ºC to +59.9ºC)

Page 23

4 x MIN/MAX value of outdoor temperature and humidity display with time & date of recording x Low/High outdoor temperature and humidity alarm

Page 24 - SWITCHING ON/OFF THE BUZZER

58 WARRANTY INFORMATION Warranty Information La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing def

Page 25 - BUZZER OFF icon

60 This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do not allow the exclusion of

Page 26 - POSITIONING

6 Cable connection between the wind sensor and the thermo-hygro sensor Cable connection between the rain sensor and the thermo-hygro sensor Wireless

Page 27 - Wall Bracket

8 displayed on the Weather Center. If this does not happen after 30 seconds, the batteries will need to be removed from both units. You will have to

Page 28 - SPECIFICATIONS:

10 x After batteries are installed, there will be synchronization between Weather Center and the sensor. At this time, the signal reception icon wi

Page 29 - LIABILITY DISCLAIMER

12 and this code must be received and stored by the Weather Center in the first 30 seconds of power being supplied to it. BATTERY CHANGE: It is rec

Page 30 - WARRANTY INFORMATION

14 x In the weather alarm setting mode, press and hold to adjust different alarm value and switch the alarm On/Off x Press to activate the reset m

Page 31

16 Air pressure histogram Outdoor temperature in °F or ºCWind direction display and wind speed in Beaufort scale Calendar di

Commentaires sur ces manuels

Pas de commentaire